2 meters #22 solid wire black

🔹 2 Meters #22 AWG Solid Wire (Black)

A flexible, single-core solid conductor wire, perfect for prototyping, point-to-point wiring, and creating reliable, semi-permanent connections in breadboards, circuit boards, and chassis wiring. The solid core holds its shape for easy routing and insertion.

✅ Specifications:

• Conductor Type: Solid Core (Single, rigid strand)

• Wire Gauge (AWG): #22 (22 AWG)

• Conductor Diameter: ~0.644 mm

• Insulation Material: PVC (Standard)

• Insulation Color: Black

• Length: 2 Meters (Approx. 78.7 inches)

• Rated Voltage: Typically 300V

• Rated Temperature: Up to 80°C (176°F)

⚙️ Key Features:

• Breadboard & Protoboard Friendly: The rigid solid core inserts easily and securely into breadboards, perfboards, and terminal blocks without fraying.

• Holds Shape: Ideal for creating neat, custom wire paths and point-to-point connections that stay in place.

• Easy to Strip & Solder: PVC insulation strips cleanly, and the solid core tins easily for reliable soldered joints.

• Color-Coded: Black is the universal standard for Ground (GND) or negative/return paths in DC circuits, aiding in clear and correct circuit assembly.

• Durable & Standard: Made with high-conductivity copper and flame-retardant PVC insulation for general-purpose use.

📦 Typical Applications:

• Prototyping: The #1 choice for making connections on solderless breadboards for Arduino, Raspberry Pi, and other electronic projects.

• PCB & Perfboard Work: Jumper wires, bussing, and creating connections on prototype boards.

• Chassis & Internal Wiring: Low-current signal wiring, sensor connections, and power distribution within enclosures.

• Educational & DIY Electronics: Perfect for learning circuits, school projects, and hobbyist repairs.

• Model Making & Robotics: Used for internal wiring in RC models, drones, and small robots.

🔧 Usage Tips:

1. Wire Stripping: Use a proper wire stripper set for 22 AWG to avoid nicking the solid conductor.

2. Bending: Bend gently to avoid work-hardening and breaking the copper. Use needle-nose pliers for tight bends.

3. Current Rating: Maximum ~3-5 Amps (depending on insulation rating and environment). Best suited for low-current signal and power applications.

4. Color Convention: In standard DC electronics:

   • Black: Ground / Negative (-)

   • Red: Positive/VCC (+)

   • Other colors: Used for signals or alternate voltages.

⚠️ Important Note:

• Not for Frequent Flexing: Solid core wire is not recommended for applications requiring repeated movement or flexing (e.g., robot joints, door wiring), as it will fatigue and break. Use stranded wire for those purposes.

• Check Gauge: Ensure #22 AWG is appropriate for your current requirements. For higher currents, use a thicker gauge (lower AWG number).