ESP32 S3 Development Board Type C

🔹 ESP32-S3 Development Board – Type-C, Dual-Core Wi-Fi + Bluetooth 5 LE

This ESP32-S3 development board features a USB Type-C port for modern connectivity, easier programming, and higher power delivery. Powered by the dual-core Xtensa LX7 processor with AI acceleration, it’s ideal for edge AI, voice recognition, smart home devices, and advanced IoT projects.

✅ Specifications:

• Processor: Dual-core Xtensa® LX7 @ up to 240 MHz

• SRAM: 512 KB

• Flash: 4MB / 8MB / 16MB (varies by version)

• PSRAM: Optional (8MB / 16MB on some models)

• Wireless: 2.4 GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 LE + mesh

• USB Connector: Type-C (USB OTG + Serial/JTAG)

• GPIO Pins: 36 – 45 (varies by board)

• Interfaces: SPI, I2C, I2S, UART, PWM, ADC, DAC, CAN, SDIO

• Onboard Features: RGB LED (WS2812), Voltage regulator, Boot/Reset buttons

• Operating Voltage: 3.3V

• Input Voltage: 5V (via USB-C)

• Dimensions: ~52mm x 28mm (typical)

📦 Features:
✔️ USB Type-C – modern connector, no more Micro-USB
✔️ Native USB support – no external USB-to-serial chip required
✔️ AI acceleration – vector instructions for machine learning
✔️ Dual-core 240MHz – handles complex tasks smoothly
✔️ Rich peripheral set – versatile for any project
✔️ Low power consumption – ideal for battery-powered devices

📦 Applications:
✔️ Edge AI and machine learning projects
✔️ Voice recognition and smart speakers
✔️ Home automation and IoT devices
✔️ Video and camera streaming
✔️ Human presence detection
✔️ Smart displays and HMI
✔️ Wireless sensor networks
✔️ Robotics and motor control

🔧 Programming Options:

• Arduino IDE (ESP32 board package)

• MicroPython / CircuitPython

• ESP-IDF (Espressif’s official framework)

• PlatformIO

⚠️ Important Notes:

• 3.3V logic – I/O pins are 3.3V tolerant only. Use level shifters for 5V devices.

• USB-C cable – Use a data-capable USB-C cable for programming.

• Driver – USB-Serial-JTAG controller built-in — no extra driver needed on most modern OS.